How Much Does Tie Rod Replacement Cost

When you think about the term “tie rod,” you picture it in the context of an automobile’s steering system. But tie rods can be found in many different things, including planes, towers, steel structures, and masonry walls.

What is a tie rod? Tie rods are to cars as nails are to a house. They hold things together in a car and also help it in its performance by keeping the vehicle’s front wheels aligned with its body. Without tie rods, a car would not be able to drive well or effectively.

If your tie rod gets broken and you keep driving, you’ll end up having an accident because your car won’t be able to turn as quickly as it should.

You may also have to spend more money due to your mechanic finding and fixing other issues with your steering rack that weren’t initially apparent. A steering rack replacement can cost anywhere from $1,700 to nearly $2,100.

If you need a tie rod replacement, you probably don’t have to spend a lot. It’s worth keeping that in mind just in case your mechanic calls and says you might need more than just the tie rod replaced.

What Is the Function of the Tie Rod in a Car?

Many cars and other vehicles in our day and age use a rack-and-pinion steering system. The rack-and-pinion system has a steering rack used to assist drivers in turning their vehicles.

The ends of the steering rack have tie rods that will push and pull the front tires when the wheel is turned by a force that’s strong enough to make it do so.

A tie rod can be fitted with an end cap or threaded. The tie rods are An important aspect of a car, and they help control its steering and alignment.

Although they are small in comparison to other parts that may help with steering, such as tires, rims, or steering wheels, without properly functioning tie rods, you won’t be able to turn at the speed you’re capable of.

Also Read: Timing Chain Replacement Cost

What Are the Various Bad Tie Rod Symptoms?

The following are the symptoms of a bad tie rod

1. Poor Vehicle Alignment

Tire wear can be increased by bad alignment because when a vehicle is properly aligned, this means that it will steer straight and make turns easier. When tie rods are out of alignment, on the other hand, the impacts to your tires and wheels will wear them down faster.

Bad alignment can be very dangerous, even leading to a total loss of control. If you notice your steering wheel shaking or pulling in one direction, visit a mechanic today and have the issue checked out.

2. Uneven Tire Wear

If there is an even distribution of weight through your car’s suspension and steering systems, the tires will wear evenly across their surfaces. This results in a longer life for all tires present.

If your tie rods fail, you will see a decrease in alignment and uneven wear on your tires. This means that you may have to spend more money repairing them or even buy new ones altogether.

3. When the Car Is Jacked Up, the Wheel Feels Loose

If you’re not sure whether your tie rods are in good working order and have a few minutes to spare, consider performing a quick test in your driveway. You will only need a jack. Lift the front end of your car and grab the tire using your hands.

Place your hands at three and nine o’clock, and then move the steering wheel side to side. Next, place your hands at three and nine o’clock and move the steering wheel from left to right.

This should be done on both the front and back wheels. If the car is normal, you won’t be able to turn or rotate the wheels by hand because they are in alignment.

If you hear clicking sounds when your car’s wheels are turned or moved at any angle, this may mean that there is a major problem with the tie rods.

4. Shaking & Clunking Noises

In eight cases out of ten, a bad tie rod is the reason for a shimmy in your steering wheel. When driving at low speeds, you will likely hear rubbing and clunking noises (they usually get louder when braking).

The most common signs of worn tie rods are loud rattling/clunking sounds upon braking, as well as shaking or vibration in your vehicle’s steering wheel.

5. An unresponsive Steering

Wearing tie rods can cause your steering wheel to feel loose and degrade handling performance. There may be excessive play in the wheel, or perhaps it seems like you’ve got to turn harder for the car to go where you’re trying to steer it.

This looseness and instability could be caused by several different problems, including worn suspension components, but bad tie rods are the most common reason.

What Are the Benefits of Replacing a Bad Tie Rod?

To keep your car running smoothly, tie rods are essential. If your tie rod ends malfunction, you will not have a pleasant driving experience.

Your vehicle will handle poorly, and with heavy use, you can find yourself in a pretty dangerous situation as it could lead to an accident or breakdown.

Your car’s life span will be lengthened if your tires and alignment are in good condition. A symptom of bad tie rods would be that the alignment gets worse. The car will wear at a higher rate with bad tie rods, so you should get them replaced before it happens, saving you money in the process.

How Long Does It Take To Fix a Tie Rod?

It depends on the severity of the damage. If only one tie rod is bent, it may be possible to straighten it out with a tool called a tie rod separator. This tool will force the two ends of the tie rod apart by applying pressure to either side of the damaged piece.

A tie rod can be fixed in as little as one hour, but will typically take longer if it’s more complicated. The length of time also depends on whether or not the car needs an alignment afterward.

If so, then the technician will need to take apart other parts of the vehicle and wait for them to be delivered before starting work on the tie rod itself.

Can You Drive A Car With A Bad Tie Rod?

It’s not a good idea to drive a car with a bad tie rod. This will endanger you and your passengers and other drivers, pedestrians, and anyone else that happens to be nearby on the road.

A bad tie rod can lead to worn tires, which means you’re going through them faster than expected. It could lead to blowouts while you’re driving, which can be very dangerous.

In the worst-case scenario, a bad tie rod can break and cause you to lose complete control over your vehicle at high speeds, which could lead to a severe accident. Negligence in replacing the bad tie rod might end up causing a crash that leaves you or others injured.

Also Read: Spark Plug Replacement Cost 

How To Replace a Tie Rod Yourself

Follow these steps to replace your tie rod ends

  1. Lift the vehicle and support it with steel safety stands.
  2. Remove the tire and wheel assembly.
  3. If possible, measure the length of the tie rod ends and records them. Alignment is easier if the new tie rod is the same length as the previous.
  4. Lock the tie rod end adjusting locknut or sleeve. A tied-end removal tool can be used to remove the tie rod ball-stud from the steering knob. Once the tie rod has been disconnected from the inner tie rod end, it can be unthreaded.
  5. If an inner tie rod is being replaced in a rack-and-pinion steering system, the tie rod steering shaft boot must be removed. Then the tie rod should be unthreaded from the steering rack or the outer tie rod end.
  6. Install the new tie rod end with all fasteners, and tighten the adjusting lock nuts to the OEM torque value. Use The length of the removed tie rod to assist in the wheel alignment.
  7. With a few exceptions, every time a suspension part is removed or replaced on your vehicle, the alignment must be checked, measured and adjusted to factory specifications. Some mobile mechanics are able to perform mobile alignments at your location using portable equipment. Most likely, however, the last step will be to take the vehicle alignment to an alignment shop nearby for measurement and adjustments.

This video walks you through replacing your inner and outer tie rod ends

Things To Keep In Mind When Replacing Tie Rods

  1. Tie rod ends should be replaced in pairs on motor vehicles. While each tie rod end is replaceable, it’s important to replace a pair simultaneously because most vehicles have four tie rod ends – 2 on each side and the vulnerable outer ones tend to fail if one fails.
  2. Once repairs have been carried out to your vehicle, you should check to ensure it is aligned by either taking it on a test drive or visiting a mechanic specializing in alignments.
  3. When you have an alignment done, you should get a printout of the car’s alignment settings before and after the alignment is done. A good alignment shop will align the car to the factory settings, not the allowed settings. To ensure the alignment is good and lasts a long time, the shop will inspect the car’s suspension before starting the alignment. If the tires are not wearing unevenly, the alignment will be good and last long.

How To Save Money On Tie Rod Replacement?

If you’re familiar with your car and know the basics, replacing tie rods is easy. You can do it at home with very little equipment, too!

It’s important to know how to replace them if you don’t have experience – especially if your car has rack-and-pinion steering because they’re much bigger and more complicated to replace than a normal tie rod. You can learn how to replace tie rods by checking out the instructions below.

Scott Greene is a seasoned automotive technician for over 5 years and has been deep into advanced automotive diagnostics for a couple of years. He Loves writing about Automotive Diagnostics and Repair, Trouble codes, Buyer guides for various car parts and accessories, and lots more. 

Leave a Comment