How Long Does it Take to Replace Motor Mounts? (+ Cost)

How long does it take to replace motor mounts? How much does this replacement cost?

Your vehicle’s engine is kept in place by a component called an engine mount. Most vehicles hold the transmission and engine together by about 3 or 4 mounts.

The mount that holds the transmission is referred to as the transmission mount, while the engine mount holds the engine.

You can find the engine mount attached to the chassis or your vehicle’s body in a particular section. You can also find the engine fastened in some other section because of its numerous movements and spinning elements, which leads to vibrations.

The role of an engine mount is to maintain the engine in position while reducing the engine’s movement in the automobile. So, when the motor mount becomes faulty, how long will it take to get a replacement?

You will need about 4 hours to carry out a motor mount replacement. It may take about 30 minutes to 4 hours to carry out a replacement for a V12 and V8 engine variants, and this depends on the mount’s accessibility.

Replacement of motor mounts takes between one to four hours, depending on the mount accessibility.

Breakdown of your motor mount over time can steer serious damage to your engine, and your vehicle may suffer some major problems.

It becomes very unsafe to drive once you have a broken motor mount. A faulty motor mount is responsible for vehicle shaking while driving.

Driving in a noisy car or changing gear by itself can be very inconvenient. However, the time needed to resolve the problem is always the matter.

The amount of time for replacement depends on the kind of engine mount. You may need 30 minutes for some. But generally, the time for replacement is between 30 minutes to 4 hours.

How Much Will it Cost to Replace Motor Mounts?

The cost of replacing motor mounts is about $150-$1000. The cost of getting a new one and paying your mechanic is inclusive. You will spend less if you try doing it yourself.

Also, you should note that the model and make of your vehicle influence your motor cost. For instance, the price of parts may differ in different cars.

Popular automobiles like Chevy and Ford have cheaper parts. For cars like Mercedes, the parts price is relatively high.

Factors like the mount location and the number that need repair also affect the cost.

This means you can spend $60 to $150 if you fix it yourself and about $150 to $1,000+ if you get a professional service; however, you will spend about $250 to $500 on an average.

Also Read: Transmission Mount (Functions, Symptoms & Replacement)

Do I Need to Replace All 4 Motor Mounts?

Although you may not have to replace all the engine mounts in your vehicle, they all have the same lifespan, so you have to pay attention to the ones you are not changing.

Other mounts receive a lot of pressure when one mount is injured, and this speeds up their breakdown.

The level of damage will determine the number of engine mounts that need replacement. It may be more than a single replacement or probably all. If some of the mounts are in good shape, you may replace only the spoilt ones.

Advantages of Replacing Bad Motor Mounts

The major benefit of an engine mount is to ward off disruptive tremors of the engine from gaining access to the frame or chassis. As a result, all the monitors and associated parts are protected against unnecessary breakage and vibrations.

The advantages of replacing a faulty motor mount include:

Reducing Noise and Vibration.

A vehicle’s engine can be so loud and accompanied by many things. You will need a valuable engine mount because of this. When you use an engine mount that is not suitable for your vehicle, your vehicle may become shaky and disruptive.

You will risk enhancing the input if you pick an incompatible spring rate or stiffness. Real hazard sets in when there is much noise and no comfort level; the motor can get damaged.

Absorption and Balancing of Energy and Motion

Your engine mount has to balance well between enabling movement and absorbing energy. This equilibrium affects the engine’s level of vibration.

If an engine mount restricts energy flow, your engine will shake and jiggle more. On the other hand, excess leeway will create excessive movement generating more harm to the engine.

Reduced Breakdown

This equals to loss of money for the person in charge of the machines. Due to this, you will have to use the best components.

If a machine is isolated adequately, it will lead to a reduction of excess motion and vibration.

Rather than just buying costly engine mounts, it is important to carry out an assessment. By investigating, you can get a suitable engine mount for your vehicle.

How Long Does it Take to Replace One Motor Mount?

The replacement of a single motor mount takes about two to four hours. However, your vehicle’s model determines the amount of time you will need for the replacement.

You can access and remove the rear mount within 1 hour for most older vehicles and those with larger bodywork or smaller engines. You may use two to four hours in other vehicles.

How Long Does it Take to Replace Three Motor Mounts?

You may decide to replace more than a single mount. Moreover, all the mounts will have the same lifespan. On most vehicles, it is standard to have a transmission mount, front mount, back mount, and flank mount.

It will be impossible to fix all the mounts at once. Nevertheless, the mount’s position determines the amount of work and time needed for its replacement.

In many cases, it takes about 20 to 60 minutes to replace the front and side motor mounts. You will only have to remove a few parts without dismantling anything.

How to Tell if Engine Mounts Need Replacing

You will know when to do a replacement if you are familiar with the signs of a worn/damaged engine mounts:

1. Increased Vibrations

Increased vibrations during driving can be seen as a very common symptom of a faulty engine mount. If you notice an unusual noise while starting your engine or you feel unusual vibrations, you should know that the engine mounts are worn and will need a replacement.

The anti-vibrating properties of your engine mount get weakened if the mount is damaged. An increased vibration leads to more unusual noise from the engine, which can be detrimental to the engine if this happens over time.

2. Rocky Start

Another common sign of a worn engine mount can be experienced when igniting your vehicle; you may observe a lurch that sounds or feels unhealthy. This lurch gradually becomes a steady vibration; you may also have a lurch experience when turning off your ignition.

3. A Bumpier Ride

You can also experience a jolt while switching gears on a connected transmission if your engine mount needs a replacement. You can notice this thump or jolt easily if you drive at high speeds because the engine is working harder than usual. It will be evident that your engine mount is damaged if your vehicle does not move smoothly.

4. Impact Noises

The noise produced by an engine mount is a result of a failed engine mount. When an engine mount is worn out, it leads to ‘bangs’ and ‘clunks’ in the engine bay or around its surroundings. This noise is a result of unnecessary movements from the engine, which gets in connection with other parts, and this leads to impact noticeable sounds.

5. Visual Wear

The appearance of the engine mount’s metal part does not change. However, if you notice any significant change on the metal part, such as wraps or cracks, corrosion, etc, it means the whole mount is experiencing excessive wear. Any flaking or cracks on the engine mount’s rubber part will affect its performance; the performance may become limited depending on how severe the crack is and its main cause.

The shape and form of an engine mount determine its effectiveness, a change in form can cause damage to the engine. Carry out an engine mount replacement immediately if you observe these signals.

How Long Does it Take to Replace Motor Mounts

What Happens if I Don’t Change my Motor Mounts?

Once your engine mount is in usage, there is a possibility that it will wear irrespective of the quality, and you will need a replacement. Failure to replace a faulty engine mount could result in the following damages:

Road risk

Wear could cause a mount to break off from the engine as there is no effective support. Road hazards could occur if you ignore the replacement of worn engine mounts, causing harm to other road users and yourself.

Damage to the engine

A faulty engine mount could cause misalignment or engine movement. Worn or broken engine mounts could lead to the engine sliding around in the engine bay in all directions, which is very obvious when driving at an increased acceleration.

Damage caused to other components

Vibrations produced by engine mounts can have a visible effect on other car parts, such as radiator hoses or fan belts, leading to snapping or stretching. Therefore, a replacement is important for your vehicle’s overall safety.

If any of the symptoms listed above are evident in your vehicle, it is best to carry out a proper examination and get a replacement if the engine mounts are worn.

How Long Can You Drive With Bad Motor Mounts?

Driving with a faulty motor mount is risky, and it is not advisable. Suppose you choose to consider the time range this article provides without carrying out a proper examination on your mounts to know the condition. In that case, it could lead to a severe transmission and engine crisis.

The only symptom of a motor mount that is safe to ignore is the clunking noise. This is basically from a personal experience, during my daily driving, there have been a clunking noise by my motor mounts for about 10,000 miles and a year. 

However, it is advisible get a replacement when you experience vibrations or have some spare time. You can only postpone some problems; you cannot forget about them.

How to Replace Motor Mounts

  • Position wheel chocks at the back of the posterior wheels. Open the bonnet.
  • Find the motor mounts. Replacing everything is advisable because if one wears out, the rest have a higher chance of wearing out sooner. Also, examine the engine and the firewall accessory clearance. Consider this later, as you do not want to cause another damage by raising the engine too high.
  • Turn on your parking brake and jack the vehicle’s front up. Use jack stands to support it. You can use a solid wood block or a big jack pan to support your engine. Avoid using only the jack on your oil pan to prevent breaking it. Use enough pressure to lessen the engine pressure on your motor mounts.
  • With the aid of a long extension and socket, take off the mount bolts from the engine side.
  • Go ahead and take off the bolts from the chassis side.
  • Use the jack to lift the engine slowly. Examine each of the full pumps to know if you have adequate clearance to take out the fault motor mount. Pay attention to the orientation when you remove it.
  • Heat shields should be transferred to the current motor mounts and put in place.
  • Place the bolts for the chassis and tighten them by hand.
  • Gradually align the engine with the current mount. Place the bolts for the engine side and torque it properly.
  • Carry out the same process for the rest.

Also Read: Radiator Hose Replacement Cost 

Frequently Asked Questions – How Long Does it Take to Replace Motor Mounts?

Are motor mounts easy to replace?

The replacement process of an engine mount is not difficult, but can be complex at times. Before starting, look out for obstacles between the wall and the engine ( like radiator hoses or crimped AC lines).

How much does it take to replace motor mounts?

On average, the cost of replacing an engine mount is between $200-$600. Labor cost and cost of parts may vary, and this depends on your vehicle’s model and make. The cost for parts will be between 50 and 150 dollars, while the cost of labor will be about 150 to 450 dollars.

Is it worth replacing motor mounts?

During general car overhaul, the most neglected component is the motor mount, but replacement of old and worn mounts can enhance the smooth running of your engine and eradicate all noisy and uncomfortable vibrations felt on the seats or steering wheel.

Is replacing engine mounts a big job?

The rate of labor per hour will be different among shops; you can go ahead and ask about it. Replacing a motor mount is a huge job, so be mindful of mechanics that are willing to do the work for any amount.

How long can I drive with a broken motor mount?

The level of damage will determine this. If the symptoms you are experiencing are not so serious, you can keep driving. You can drive a thousand miles before significant symptoms appear; when this happens, you have to get a replacement immediately or put the powertrain at risk of getting damaged.

Can you drive with broken motor mounts?

It is advisable to have your vehicle properly examined by a skilled mechanic and fixed immediately if you notice an issue with your motor mount. A failed motor mount can cause severe damage to your engine and will also affect the vehicle’s performance adversely. Driving with a failed motor mount is highly unsafe.

Conclusion – How Long Does it Take to Replace Motor Mounts?

Once you observe any deteriorating symptoms from your engine mount or feel that these components( shaking, hard shifting, slipping, hear clunking sounds, etc.) are obvious in your vehicle, visit a mechanic to check it and carry out a replacement if need be.

Replacement of an old or worn engine mount is important for your car’s general well-being.

Fairly used or refurbished parts can save you some money. An engine mount that is created to fit or exceed the requirements and specifications of a new one but at a reduced price, can be referred to as a refurbished engine mount.

Scott Greene is a seasoned automotive technician for over 5 years and has been deep into advanced automotive diagnostics for a couple of years. He Loves writing about Automotive Diagnostics and Repair, Trouble codes, Buyer guides for various car parts and accessories, and lots more. 

Leave a Comment